All Categories
The M3 FPV Drone Shock-Absorbing Balls are precision-engineered vibration isolators designed for high-performance FPV drones. Utilizing advanced thermoplastic elastomer (TPE) material, these damping balls effectively absorb high-frequency vibrations from motors and propellers, significantly reducing jello effect in aerial footage. Optimized for 5-inch racing and freestyle drones, they provide enhanced flight stability and camera image clarity even in aggressive maneuvers. The spherical design ensures omnidirectional shock absorption while maintaining minimal weight penalty for competitive flight dynamics.
| Parameter | Specification |
| Material | Thermoplastic Elastomer (TPE) |
| Durometer | 50A ±2 Shore A |
| Diameter | 14.5mm ±0.1mm |
| Mounting Hole | M2 Thread Compatible |
| Color Options | Black / Orange / Blue |
| Operating Load | 15-35g per ball |
| Temperature Range | -30°C to +80°C |
| Weight | 0.48g ±0.02g per ball |
| Set Configuration | 4 balls per set |
• Tri-Axis Damping: Omnidirectional vibration absorption for pitch/yaw/roll axes
• Jello Elimination: Reduces high-frequency vibrations (>100Hz) by 85%
• Tear-Resistant: Reinforced core withstands 20kg pull force
• UV Stabilized: Maintains elasticity after 500+ sunlight hours
• Quick-Install Design: Snap-fit installation without tools
• Flight-Tuned Hardness: 50A durometer optimized for 5" prop vibrations
| Parameter | Value | Test Standard |
| Natural Frequency | 12Hz ±1Hz | ISO 18437-2 |
| Damping Ratio | 0.25 ±0.03 | ASTM D2231 |
| Compression Set | ≤8% (70°C×22hr) | ISO 815 |
| Tensile Strength | ≥4.2 MPa | ASTM D412 |
| Vibration Transmissibility | <15% @ 120Hz | ISO 10846 |
• HD camera isolation in high-KV setups
• Digital VTX anti-vibration mounting
• Gyro sensor noise reduction
• 6S powertrain vibration damping
• Gopro session vibration control
• Lightweight gimbal pre-isolation
• Long-range mapping camera mounts
• Low-frequency harmonic suppression
• Thermal camera stabilization
• LiDAR sensor anti-vibration
• Precision agriculture spray nozzles
• Bridge inspection camera isolation
• 3D printed camera cage suspension
• Custom frame harmonic tuning
• Micro drone motor dampers
• Experimental propulsion isolation
• Thermal Stability: Maintains damping performance from -30°C to +80°C
• Chemical Resistance: Resists aviation fuels, lubricants and UV exposure
• Weatherproof: IP54-rated dust/water protection
• Aging Resistance: <10% hardness change after 1000hr @ 70°C
• RoHS Compliance: Meets 2011/65/EU directive requirements